Archive for January, 2011

Telekinesis – A Theory That Makes it Possible

Monday, January 31st, 2011

We made rapid progress after realizing that the Earth was not flat, but no matter what evolutionary stage we are at in terms of understanding existence, we could always still be wrong in our interpretations. I wrote my telekinesis article based on my vision of elementary existence with one purpose only – to help set your mind to enable telekinetic abilities – and not as an attempt to teach science. To master an ability to influence the kinetic properties of an object, it is imperative to change your perception and understanding of what that object is – what exactly it is you are trying to move!

Lets say I have a pair of plastic sun glasses in front of me – I am planning an attempt to move them across the table. If I think of it as a solid object, it wont matter what kind of visualization techniques or energy manipulation I try, there will be no result whatsoever. Now, let’s look at that same pair of glasses on an elementary level. Molecules with distances between their protons and electrons are proportional to distances of a planetary system – and subatomic particles themselves are also made of energy and information. If we look at these glasses on an elementary level, they not really existing as a material object, they are simply made up of energy and information – fluctuations of a Zero Point Field.

According to Quantum Theory, particles like electron only forms as one, ones observed, wave changed its properties and receive somewhat fixed position in space, materialized as a particle. Another way to look at it, as if ones processed with mind their is a record in your mind that control properties of that particle. My personal understanding is – particle has two components fluctuation of Zero Point Field and a node in your mind that control your personal perception of that particle, its position and other properties in your virtual space and time. Node and a wave are interconnected, so same node are also contained within a Zero Point Field.

So, there is a glasses in front of me, that is really just series of nodes in my mind that control fluctuations of a Zero point Field, that I perceive as a glasses. These fluctuations are waves, they have properties such frequency, phase, amplitude, those waves interact with each other forming stream of energy and information that our mind process as reality. To enable telekinesis, we have to also change perception of what we are. We are made of the same stuff like the glasses and everything else in the reality we experience are the same kind of fluctuation of Zero point field, on the elementary level we are also just an energy and information. We are neither as solid or as dense as we like to perceive ourselves.

In comparison to glasses every particle of our body constantly controlled with our consciousness, So on quantum level of reality any body movements, or moving objects conventionally using body parts, are not so different from telekinesis, Think of it as If I take glasses with my hand and move them forward, On the Quantum level pocket of Energy and Fluctuation that controlled with my consciousness that formed my Body are in immediate proximity to packet of energy and Information that formed glasses, ones I touch glasses energy of a glasses and my become coherent, on the level of Information – Transform Nodes that are in control of a particles location of a glasses get parented to transform nodes of my hand. So I have moved the glasses, my reality changed, to be more exact information of the transform node of a glasses has changed.

I think the most important aspect for us in understanding Telekinesis is to allow an assumption that your consciousness is not limited within your body’s nervous system, it is connected to everything that you are aware of. Everything you can sense, you should be able focus on and control with your mind. When I look at the glasses, my consciousness instantly connects to them. Information exchange gets established. The more I focus my attention on the glasses, the more I sense them. The vibration of the glasses becomes coherent with my own, and that object then becomes part of me and no longer feels like a separate object. Even if I am not touching those glasses, I can sense them like an energy field – the vibration, dynamics and I can also see an aura around them.

If you have that kind of experience, you can influence that object without touching it. Understanding how to focus on an object is the key factor. If we just stare at the glasses with our eyes, we will not move them. Instead, we have to focus on the node inside our minds that forms those glasses. Everything that is happening in reality is actually happening in our minds. If we move the glasses in our mind, by changing the values of the transform node, reality will adjust accordingly and the glasses will move. I am not talking about just visualizing how the glasses move but In order to move them, the entire experience of the glasses should change. Think of that experience as a set of brainwaves. By adjusting the frequency, phase and amplitude of those waves, you can change the values of a transformation node and move that object.

Trying for the first time.

Everybody fails the first time! This does not mean anything except it defines you as having an open mind. Most importantly, the quality of the human mind is being opened to different possibilities. Only truly openminded people can achieve telekinesis. So, adjust your mind and start believing that you can do it. Take a pair of glasses and put them on the table in front of you. The surface of the table should offer little or no resistance and the glasses must be able to glide easily across the table surface. Move the glasses with your hand, let’s say 500 to 10000 times. Do not count and repeat this same move in time and space using exactly the same trajectory, temp and amplitude. Personally I like to move them outward.

When you do it, only concentrate your attention on how you perceive the glasses inside your mind. Try not to think of the object moving, just try and experience the object moving. Remember that it is not a material object! Focus on your experience, sensing what changes in your mind. At some point try to anticipatethe moving experience with your mind just before you actually move that object with your hand. If you are in the right state of mind, you will start to feel that the glasses are responding to your thoughts. As long as you touch the glasses with your hand, it is alot easier to make them responsive.

I recommend that at first you practise getting the right feelings actually touching the objects physically. The hand has a more active nervous system and is the most receptive to energy and vibrations. It is a good idea to start by influencing an object while you’re touching it with your finger or hand. Try telekinetically to move an object while you have one finger on top of it. Also rolling a pen on top of your hand. As you advance you can place a pair of glasses on a piece of glossy cardboard, and in this way you can sense the glasses through the cardboard. When they start vibrating under the influence of your mind, increase the thickness of the cardboard.

Certain Binaural Beats and Stereoscopic Visual Stimulators help to trigger particular Theta brainwave activity that correspond to specific states of consciousness in which telekinetic and other paranormal abilities occur. I recommend using this technology as it will dramatically increase your chances of mastering telekinesis by helping you set the right brainwaves. Once you get a sense of it, you will be able to get there without the help of external stimulators. Building telekinetic power is very similar to building the muscles! Exercise daily and remember the results actually come when you rest. Be creative – try everything! Whatever exercise ideas come to mind! Do not think words, think actions! Believe that you are dreaming, even if you are awake. In a dream, you can do anything you want, if you know that it is a dream. Well – thinking quantum physics in the reality you are in is not that different from a dreamstate, and actually allows the same freedom for your powerful mind. Free your mind and explore the endless possibilities of being human!

Importance of Mechanical Modeling in Mechanical Product Design

Monday, January 31st, 2011

Mechanical 3D models using CAD tools brings life and transparency into the design goals with respect to clash detection, clearance, aesthetics, tolerance aspects and helps communicate design ideas more effectively.

Mechanical 3D modeling is an art of crafting a methodical wire-frame demonstration of any 3D (three-dimensional) object. With CAD tools, 3D models could be displayed as an image in print using computer simulation. CAD Modeling is usually the first step in a rapid prototyping (RP) system. The conventional approach to CAD modeling is through engineering drawings. A designer inputs dimensions and interconnects lines (along with other basic shapes) using CAD software like AutoCAD, Pro-E, 3D-max.etc to create a virtual 3D model.

Benefits of using Mechanical 3D Modelling in product design are:

-> Speedy validation/verification of designs against specifications & design rules

-> Effective 3D visualization for full fledged manufacturing drawings

-> Accurate wire-frame geometry creation

-> Bi-directional parametric association (alteration of any feature is reflected in all information relying on that feature; mass properties, drawings, assemblies, etc.)

-> Simplified design of assemblies, which are set of parts and/or other assemblies

-> Hassle-free checking of kinematics, interference and clearance in assemblies

-> It allows for 3D sectional views

With field modifications, inadequate support from the original CAD models poses a problem. The technical person on the field may have found a better way to mount the part by amending the original design, or damage to the part may demand modification to rectify the issue. This modification may not be documented in the CAD archives but can be accomplished with 3D parametric models of the mechanical design.

Also, a design engineer may want to introduce a value-added design to an existing part, but the first manufacturer of the part may not be willing to release their internal CAD files for proprietary reasons. The process of 3D modeling overcomes these problems by allowing the creation of a CAD model by scanning the existing object.


Gadget News | Free Backlink | Best LED Monitor | Super Sale For You | APC AP7900 | สนามบอล